Home » Products » Supported Industrial Gloves » Reflexx N16 MS Microsandy nitrile supported industrial gloves
Manufacturing, Electronics, Hobby
Knit Colour: grey
Coating: MicroSandy Nitrile
Coating Colour: black
XS – S – M – L – XL – XXL
EAN CARTON BOX
The CE marking (European Conformity marking) attests that the product meets the European Union rules and requirements for manufacturing and commercial marketing.
In April 2018 the New PPE Regulation EU 2016/425 has amended and replaced the previous PPE Directive 89/686/EEC. The new PPE regulation now specifies three classes based on risk definitions:
– CAT I: minimal risk, self-certified;
– CAT II: intermediate risks (other than those listed in Categories I and III), certified by approved body;
– CAT III: very serious risks, which may cause death or irreversible damage to health; certified by approved body.
Only the approved bodies may issue a CE mark for PPE CAT II and CAT III. Without a proper CE mark the gloves may not be sold or used.
A – Abrasion resistance (cycles): 1-4;
B – Blade cut resistance (coup test / index): 1-5;
C – Tear resistance (Newton): 1-4;
D – Puncture resistance (Newton): 1-4;
E – EN ISO cut resistance (Newton): A-F;
F – EN impact protection: pass (P) or fail (F)
Level “x” can also be applied for A through E above, which means “not tested” or “not applicable”.
PPE Declaration of Conformity
Material: polyamide and nitrile
Garbage Can: general waste
Always check the disposal rules of your municipality
Primary Packaging (Bag)
Item: low density polyethylene bag.
Material: plastic LDPE 4
Garbage Can: recycling bin
Secondary Packaging (Carton box)
Item: corrugated cardboard box.
Material: paper PAP 20
Empty the packaging of its contents before collecting it. Reduce the volume of the dispenser and box.
Via Passeri, 2 46019 Viadana (MN) – Italia
Copyright 2022 © Reflexx S.p.A. Unipersonale – P.IVA 02085450209
I campi contrassegnati con l’asterisco * sono da compilare obbligatoriamente.
The fields marked with an asterisk * must be filled in.